AC Room Thermostat with BAC net communication , 1 or 2-stage Heating and Cooling Control

Short Description:

Typical used in buildings for single zone rooftop units, split systems, heat pumps or hot/chilled water systems.
Designed to provide exceptional temperature control of single & multistage heating and cooling equipment required to reside on BACnet MS/TP networks.
A PIC statement is supplied to be easily mapped back to a graphical user interface.
Self configuring / adjustable baud-rate senses the communication conditions of the current MS/TP network and match them.
BACnet PIC statement provided to further facilitate integration.
Pre-configured control sequences and rich parameters selectable to meet most applications
All setup are permanently held in non-volatile memory in the event of a power failure.
Attractive turn-cover design, most frequently used keys are located on the face for quick and easy access to information. Setup keypads are located on the interior to eliminate accidental setting changes.
Large LCD display with enough information for quick and easy readability and operation. Such as measurement and setting temperature, fan and compressor work status,
Unlock and timer etc.
Automatic compressor short cycle protection
Auto or manual fan operation.
Auto or manual heat/cool changeover.
Include a timer with the auto turning-off
Temperature either °F or °C display
Set point may be locked out /limited locally or via the network
Infrared remote control optional
Backlight of LCD optional

Send email to us Datasheet Download

Brief Introduction

Product Tags

FEATURES

Typical used in buildings for single zone rooftop units, split systems, heat pumps or hot/chilled water systems.
Designed to provide exceptional temperature control of single & multistage heating and cooling equipment required to reside on BACnet MS/TP networks.
A PIC statement is supplied to be easily mapped back to a graphical user interface.
Self configuring / adjustable baud-rate senses the communication conditions of the current MS/TP network and match them.
BACnet PIC statement provided to further facilitate integration.
Pre-configured control sequences and rich parameters selectable to meet most applications
All setup are permanently held in non-volatile memory in the event of a power failure.
Attractive turn-cover design, most frequently used keys are located on the face for quick and easy access to information. Setup keypads are located on the interior to eliminate accidental setting changes.
Large LCD display with enough information for quick and easy readability and operation. Such as measurement and setting temperature, fan and compressor work status, clock and timer etc.
Automatic compressor short cycle protection
Auto or manual fan operation.
Auto or manual heat/cool changeover.
Include a timer with the auto turning-off
Temperature either °F or °C display
Set point may be locked out /limited locally or via the network
Infrared remote control optional
Backlight of LCD optional

TECHNICAL SPECIFICATIONS

Power supply	24 VAC±10% 50/60HZ
Power consume	≤ 1W
Electrical rating	1 amp maximum load per terminal
Sensor	NTC 5K
Temperature degree	Celsius or Fahrenheit
Temperature control range (for heat/ cool)	5~35℃ (41~95℉)
Accuracy	±0.5℃ (±1℉) @25℃
Temperature differential	Two temperature differentials setting for each cooling/heating stage
Stages	Up to 2 stages cooling/ 2 stages heating
Timer	Can be set a auto turning-off timer
Cool/heat Changeover	Auto changeover or manual switch selectable by end users
Keys	On the surface: power/ increase/ decrease key Inside: programming keys
Net weight	320g
Dimensions	110mm(L)×90mm(W)×25mm(H)
Mounting standard	Mounting on the wall, 2“×4“or 65mm×65mm box
Housing	PC/ABS plastic material with IP30 protection class