Ozone O3 Gas Meter
FEATURES
Real-time measure ozone in air
Control ozone generator or ventilator.
Detect ozone data and connect to BAS system.
Sterilization and disinfection/ Health supervision/ Fruit and vegetable ripening/ Air quality detection etc.
TECHNICAL SPECIFICATIONS
| General Data | |
| Power Supply | 24VAC/VDC±20%
A power adaptor of 100~230VAC/24VDC selectable |
| Power Consumption | 2.0W （average power consumption） |
| Wiring Standard | Wire section area <1.5mm2 |
| Working Condition | -20~50℃/ 15~95%RH |
| Storage Conditions | 0℃~35℃,0~90%RH (no condensation) |
| Dimensions/ Net Weight | 95(W)X117(L)X36(H)mm / 260g |
| Manufacturing Process | ISO 9001 Certified |
| Housing and IP class | PC/ABS fireproof plastic material, protection class: IP30 |
| Compliance | CE-EMC certified |
| Sensor Data | |
| Sensing Element | Electrochemical Ozone sensor |
| Sensor lifetime | >2 years, Sensor modular design, easy to replace. |
| Warm up Time | <60 seconds |
| Response Time | <120s @T90 |
| Signal Update | 1s |
| Measuring Range | 0-500ppb/1000ppb(default)/5000ppb/10000ppb optional |
| Accuracy | ±20ppb + 5% reading |
| Display Resolution | 1ppb (0.01mg/m3) |
| Stability | ±0.5% |
| Zero Drift | <1% |
| Humidity Detection | Option |
| Outputs | |
| Analog Output | One 0-10VDC or 4-20mA linear output for ozone detection |
| Analog Output Resolution | 16Bit |
| Relay dry contact Output | One relay output to control an ozone generator or a fan
Max, switching current 5A (250VAC/30VDC)，resistance Load |
| Communication Interface | Modbus RTU protocol with 9600bps（default）
15KV antistatic protection |
| LED Light | Green light: normal working
Red light: Ozone sensorfault |
| Display Screen（optional） | OLED display ozone and temperature/T&RH. |
DIMENSIONS
Write your message here and send it to us
