BACnet Thermostat

  • AC Room Thermostat with BAC net communication , 1 or 2-stage Heating and Cooling Control

    AC Room Thermostat with BAC net communication , 1 or 2-stage Heating and Cooling Control

    Typical used in buildings for single zone rooftop units, split systems, heat pumps or hot/chilled water systems.
    Designed to provide exceptional temperature control of single & multistage heating and cooling equipment required to reside on BACnet MS/TP networks.
    A PIC statement is supplied to be easily mapped back to a graphical user interface.
    Self configuring / adjustable baud-rate senses the communication conditions of the current MS/TP network and match them.
    BACnet PIC statement provided to further facilitate integration.
    Pre-configured control sequences and rich parameters selectable to meet most applications
    All setup are permanently held in non-volatile memory in the event of a power failure.
    Attractive turn-cover design, most frequently used keys are located on the face for quick and easy access to information. Setup keypads are located on the interior to eliminate accidental setting changes.
    Large LCD display with enough information for quick and easy readability and operation. Such as measurement and setting temperature, fan and compressor work status,
    Unlock and timer etc.
    Automatic compressor short cycle protection
    Auto or manual fan operation.
    Auto or manual heat/cool changeover.
    Include a timer with the auto turning-off
    Temperature either °F or °C display
    Set point may be locked out /limited locally or via the network
    Infrared remote control optional
    Backlight of LCD optional

  • FCU Thermostat with BAC net  MS/TP, Factory Provider

    FCU Thermostat with BAC net MS/TP, Factory Provider

    Typical used in FCU air conditioning systems, with control a 3-speed fan and one or two water valves
    Designed for BACnet MS/TP network with a PIC statement to further facilitate integration.
    A PIC statement is supplied to be easily mapped back to a graphical user interface.
    Self configuring / adjustable baud-rate senses the communication conditions of the current MS/TP network and match them.
    LCD displays working status such as room temperature, set point, fan speed, etc. Makes reading and operating easy and accurate.
    All models feature user-friendly setting buttons
    Large set point range, the min. and max. limit of temperature presetting by end users
    Low temperature protection
    Celsius or Fahrenheit degree selectable
    Infrared Remote Control (optional)
    Blue backlight (optional)