Model: F2000TSM-CO2 L Series Key words: Cost-effective CO2 sensor with optional 6 LED lights Wall mounting On/off output optional RS485 Carbon dioxide transmitter with 0~10V/4~20mA output, its six LED lights is optional for indicating six ranges of CO2. It’s designed for applications in HVAC, ventilation systems, offices, schools, and other public places. It features a Non-Dispersive Infrared (NDIR) CO2 sensor with Self-Calibration, and 15 years lifetime with high accuracy. The transmitter has a RS485 interface with 15KV anti-static protection, and its the protocol is Modbus MS/TP. It provides an on/off relay output option for a fan control.
Model: F12-S8100/8201 Key words: CO2 detection Cost-effective Analog output Wall mounting Basic carbon dioxide (CO2) transmitter with NDIR CO2 sensor inside, which has Self-Calibration with a high accuracy and 15 years lifetime. It’s designed for easy wall-mounting with one linear analog output and a Modbus RS485 interface. It is your most cost-effective CO2 transmitter.
Model: G01-CO2-N Series Key words:
CO2/Temperature/Humidity detection RS485 with BACnet MS/TP Analog linear output Wall mounting BACnet CO2 transmitter with temperatue and relative humidity detection, white backlit LCD displays clear readings. It can provide one, two or three 0-10V / 4-20mA linear outputs to control a ventilation system, BACnet MS/TP connection was integrated to BAS system. The measuring range can be up to 0-50,000ppm.
Model: TGP Series Key words: CO2/Temperature/Humidity detection External sensor probe Analog linear outputs
It is mainly used in the application of BAS in industrial buildings to real time monitoring carbon dioxide level, temperature and relative humidity. Also suitable for applications in plant areas such as mushroom houses. The lower right hole of the shell can provide expandable use. The external sensor probe to avoid internal heating of the transmitter from affecting measurements. White backlight LCD can display CO2, Temp and RH if required. It can provide one, two or three 0-10V / 4-20mA linear outputs and a Modbus RS485 interface.
Model: G01-CO2-B5 Series Key words:
CO2/TVOC/Temperature/Humidity detection Wall mounting/ Desktop On/off output optional Indoor air quality monitor of CO2 plus TVOC(mix gases) and temperature, humidity monitoring. It has tri-color traffic display for three CO2 ranges. The buzzle alarm is available which can be turned off once the buzzer rings. It has the optional on/off output to control a ventilator according to CO2 or TVOC measurement. It supports power supply: 24VAC/VDC or 100~240VAC, and can be easily mounted on the wall or placed on a desktop. All parameters can be preset or adjusted if required.
Model: G01-IAQ Series Key words: CO2/TVOC/Temperature/Humidity detection Wall mounting Analog linear outputs CO2 plus TVOC transmitter, with temperature & relative humidity, also combined both humidity and temperature sensors seamlessly with the digital auto compensation. White backlit LCD display is option. It can provide two or three 0-10V / 4-20mA linear outputs and a Modbus RS485 interface for different applications, which was easily integrated into building ventilation and commercial HVAC system.
Model: TG9-CO2+VOC Key words: CO2/TVOC/Temperature/Humidity detection Duct installation Analog linear outputs Real time detect carbon dioxide plus tvoc (mix gases) of the air duct, also optional temperature and relative humidity. A smart sensor probe with the water-proof and porous film can be easily installed into any air duct. LCD display is available if required. It provides one, two or three 0-10V / 4-20mA linear outputs. The end user can adjust CO2 range which correspond with the analog outputs via Modbus RS485, also can preset the inverse proportion liner outputs for some different applications.
Model: F2000TSM-CO-C101 Key words: Carbon dioxide sensor Analog linear outputs RS485 interface Low-cost carbon monoxide transmitter for ventilation systems. Within a high quality Japanese sensor and its long lifetime support, the linear output of 0~10VDC/4~20mA is stable and reliable. Modbus RS485 communication interface has 15KV anti-static protection which can connect to a PLC to control ventilation system.
Model: TSP-CO Series
Key words: CO/Temperature/Humidity monitor Analog linear outputs On/off relay outputs Buzzer alarm RS485 with BACnet MS/TP Real-time monitoring carbon monoxide concentration and temperature. OLED screen displays CO and Temperature in real time. Buzzer alarm is available. It has a stable and reliable 0-10V / 4-20mA linear output, and two relay outputs, RS485 in Modbus RTU or BACnet MS/TP. It usually be used in parking, BMS systems and other public places.
Model: TKG-CO Series
Key words: CO/Temperature/Humidity detection Analog linear output and optional PID output On/off relay outputs Buzzer alarm Underground parking lots RS485 with Modbus or BACnet
Design for control carbon monoxide concentration in undergroung parking lots or semi underground tunnels. With a high quality Japanese sensor it provides one 0-10V / 4-20mA signal output to integrate into PLC controller, and two relay outputs to control ventilators for CO and Temperature. RS485 in Modbus RTU or BACnet MS/TP communication is optional. It displays carbon monoxide in real time on the LCD screen, also optional temperature and relative humidity. The design of external sensor probe can avoid internal heating of the controller from affecting measurements.
Model: GX-CO Series
Key words: CO/Temperature/Humidity monitor Avaliable Zero calibration Replaceable CO sensor Strong control setting and outpus Real-time monitoring air carbon monoxide concentration, displaying CO measurements and 1-hour average. Temperature and relative humidity is optional. High quality Japanese sensor has five years liftime and is replaceable conveniently. Zero calibration and CO sensor replacement can be handled by end users. It provides one 0-10V / 4-20mA linear output, and two relay outputs, and optional RS485 with Modbus RTU. Buzzer alarm is available or disable, it’s widely used in BMS systems and ventilation control systems.
Model: G09-O3 Key words: Analog outputs Relay dry contact outputs RS485 3-color backlight display Buzzle alarm
Real-time monitoring air ozone and optional temperature and humidity. Ozone measurements have temperature and humidity compensation algorithms. It provides one relay output to control a ventilator or ozone generator. One 0-10V/4-20mA linear output and a RS485 to connect a PLC or other control system. Tri-color traffic LCD display for three ozone ranges. The buzzle alarm is available.