Ozone Gas Monitor Controller with Alarm

Short Description:

Model: G09-O3

Ozone and Temp.& RH monitoring
1xanalog output and 1xrelay outputs
Optional RS485 interface
3-color backlight display three scales of ozone gas
Can set the control mode and method
Zero point calibration and replaceable ozone sensor design

Real-time monitoring air ozone and optional temperature and humidity. Ozone measurements have temperature and humidity compensation algorithms.
It provides one relay output to control a ventilator or ozone generator. One 0-10V/4-20mA linear output and a RS485 to connect a PLC or other control system. Tri-color traffic LCD display for three ozone ranges. The buzzle alarm is available.

Send email to us Datasheet Download<

Brief Introduction

Product Tags

FEATURES

Design for real time detecting and monitoring ambiance ozone level and temperature
Electrochemical ozone sensor with high sensitivity
Particular LCD display with three color backlights (Green/Yellow/Red)
Maximum ozone measuring range: 0~5000ppb (0~9.81mg/m3) /0~1000ppbAlso reset the measurement range by end user
2xOn/Off dry contact outputs for two stages alarm device, or control a ozone generator or a ventilator
Buzzer alarm and 3-color backlight LCD indication
Provide 1X analog output (0,2~10VDC/4~20mA) (can be used as transmitter)
Modbus RS485 interface, 15 KV antistatic protection, individual IP address
Provide two easy ways for calibration and setup alarm points via an infrared remote controller or via the RS485 interface.
Temperature measurement and display
Humidity measurement and display optional
Multiple application, wall mounting type and desktop type
Great performance with high quality and low price

TECHNICAL SPECIFICATIONS

Gas Sensing	Ozone electrochemical gas sensor
Sensor lifetime	>3 years
Temperature & RH Sensor	High-precision capacitive sensor
Power Supply	24VAC/VDC (power adaptor optional)
Power Consumption	2.8W /Ave.
Response Time	<60s @T90
Signal Update	1s
Warm up Time	<60 seconds
Ozone Measuring Range	20~1000ppb ( 40~1996.6 ug/m³ @20℃) default 20~5000ppb ( 40~9.81 mg/m³) optional in purchasing
Display Resolution	1ppb
Accuracy	±10ppb + 10% reading
Nonlinear	<1%FS
Repeatability	<0.5%
Alarm	Buzzer sounds and Red backlight display
Display	Green – <30% ozone range Orange – 30%~70% ozone range Red – >70% ozone range
Temperature/humidity Range	0℃~60℃ (32℉~140℉) /0~80%RH
Analog Output	0～10VDC(default) or 4~20mA linear output selectable
Analog Output Resolution	16Bit
Relay dry contact output	Max switching current 3A (220VAC/30VDC), resistance Load
RS485 Communication Interface	Modbus RTU protocol with 19200bps(default) 15KV antistatic protection
Working Condition/Storage Conditions	5℃~60℃ (41℉~140℉)/ 0~ 80% RH
Net Weight	190g
Dimensions	130mm(H)×85mm(W)×36.5mm(D)
Installation Standard	65mm×65mm or 85mmx85mm or 2”×4” wire box
Interface Connection (Max)	9 terminals
Wiring Standard	Wire section area<1.5mm²
Manufacturing Process	ISO 9001 Certified
Housing and IP class	PC/ABS fireproof plastic material, protection class: IP30
Compliance	EMC Directive 89/336/EEC