Plug & Play Carbon Dioxide Controller for Small Greenhouse

Short Description:

Real-time detecting CO2 level with wall-mounting type
NDIR infrared CO2 module inside with four CO2 detection range selectable.
CO2 sensor has Self-Calibration Algorithm and more than 10 years lifetime
Six indicator lights to indicate six CO 2 ranges
Optional Plug&Play cable which connected with a CO2 generator(American standard)
Easy to install with wall mount bracket
100~230 Volt power supply with a power adaptor
An on/off output with 6A relay to control a generator, four CO2 levels selectable for the relay switch by two jumpers

Send email to us Datasheet Download<

Brief Introduction

Product Tags

FEATURES

Real-time detecting CO2 level.
NDIR infrared CO2 module inside with four CO2 detection range selectable.
CO2 sensor has Self-Calibration Algorithm and 15 years lifetime
Wall-mounting
Special “L” series with 6 lights indicates CO2 level and makes CO2 level show clearly.
Provide a special model with an on/off relay output with a touch button to operate a fan control.
Design for HVAC, ventilation systems, offices, or other public places.
CE-Approval

TECHNICAL SPECIFICATIONS

Gas detected	Carbon Dioxide (CO2)
Sensing element	Non-Dispersive Infrared Detector (NDIR)
Accuracy@25℃(77℉),2000ppm	±40ppm + 3% of reading or ±75ppm (whichever is greater)
Stability	<2% of FS over life of sensor (15 yr typical)
Calibration interval	ABC Logic Self Calibration System
Response time	<2 minutes for 90% step change
Warm up time	2 hours (first time) 2 minutes (operation)
CO2 measuring range	0～2,000ppm
Sensor life	Up to 15 years
Power supply	24VAC/24VDC
Consumption	1.5 W max. ; 0.8 W avg.
Relay output	1X2A switch load Four set points selectable by jumpers
6 LED lights (just for TSM-CO2-L series) From left to right: Green/Green/Yellow/Yellow/Red/Red	1^st green light on as CO2 measurement≤600ppm 1^st and 2^nd green lights on as CO2 measurement>600ppm and≤800ppm 1^st yellow light on as CO2 measurement>800ppm and≤1,200ppm 1^st and 2^nd yellow lights on as CO2 measurement>1,200ppm and≤1,400ppm 1^st red light on as CO2 measurement>1,400ppm and≤1,600ppm 1^st and 2^nd red lights on as CO2 measurement>1,600ppm

Operation conditions	0~50℃(32~122℉); 0~95%RH, non condensing
Storage conditions	0~50℃(32~122℉)
Net weight	180g
Dimensions	100mm×80mm×28mm
Installation standard	65mm×65mm or 2”×4”wire box
Approval	CE-Approval